To access the vTakes menu in any given Track

1. Tap the "Track Parameter" button
2. Tap the status key of the require Track (it will turn orange)
3. Scroll down to the vTake display (it's below the Fader display)

How to switch to a new vTake

• Turn the dial until an empty vTake is displayed.

How to move a vTake
Follow steps 1-3 above to access the vTake display then:

1. Tap the [Function] button until "Move" is displayed. Tap [Enter]
2. The destination is displayed; if it is empty an "E" will be shown.
3. Use the L&R cursor to select a Track and the Dial to select the vTake. Tap [Enter] when ready.
4. Confirm the move by tapping [Enter] again.

Access the other vTake edits
Follow steps 1-3 above to access the vTake display then:
Tap the [Function] button until the required edit is shown.

Erase	Completely remove the recording, leaving the vTake blank.
Copy	Replicate the recording on another vTake
Move	Move the recording to another vTake
Exchange	Swap the recordings on two vTakes
Import	Bring in a recording from a different project.

see also "introducing vtakes"